You are here: Home / Products / Automotive Belts Series / Automotive Mold V-Ribbed Belt

Product Category

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Automotive Mold V-Ribbed Belt

  • 6PK1665

  • BELTWORTH

  • 4010310000

Availability:
Quantity:

Our MITSUSTAR V-Ribbed Belt is used main material as polychloroprene-rubber( CR rubber) and Ethylene-Propylene-Diene Monomer Rubber(EPDM rubber), the cord is low-stretch polyester cord or aramid fiber cord as the reinforcement materials. The new engine designs demand more and more space saving. Itis not unusual to encounter small pulley diameters and limited drive widths. Being extremely elastic and dimensionally stable, MITSUSTAR V-ribbed belts can adapt to the respective drive geometry. They are flexible enough to find their path as a serpentine drive through the motor labyrinth. The flexible V-ribbed belt is extremely quiet and supple in its job of controlling the power train.

MITSUSTAR V-ribbed belts drive ancillary units in cars, commercial vehicles and buses. they reduce vibration and give the generator, air-conditioning compressor, and the power steering pump the right spin.



Section:

n Belt top Surface: wear resistant polychloroprene rubber compound

n Tension cord: low-stretch polyester cord.

n Cushion layer: the high-adhesion polychloroprene-rubber compound

Gear tooth core: Polychloroprene-rubber compound with small Kevlar fibers.

Product Benefits:

l High transmission ratio

l Large speed ratio

l Extraordinarily resilient

l Largely oil and temperature resistant

l Minimum slip

Low levels of noise and vibrations

Features:

The V-ribbed belts with CR rubber have both heat and cold resistance capabilities, its flexing, aging and ozone ageing resistance are generally better than those of unsaturated rubber. It also offers better oil and solvent resistance and chemical stability. It can endure high levels of transverse and belt pitch pressure and has comparatively reduced after-strained deformation.


The V-ribbed belts with EPDM rubber offer much better aging resistance, especially ozone, weather and heat resistance. In addition, this product’s electric insulation properties, chemical corrosion resistance and impact elasticity, especially at low temperature, are superior to that of CR.

Dimensions:


Ribs

Type

Minimum Length(mm)

Maximum Length(mm)

2

PK

786

905

3

PK

550

1285

4

PK

560

1520

5

PK

625

2055

6

PK

675

2680

7

PK

870

2355

8

PK

800

2605

9

PK

1200

4145

10

PK

1108

2063

11

PK

1515

2055

12

PK

1165

2500

3

EPK

806

885

4

EPK

711

1102

5

EPK

690

926

6

EPK

691

1873

6

DPK

1188

1853

7

DPK

1360

1400

Mark:



Previous: 
Next: 
Facebook
Twitter
LinkedIn
Instagram

WELCOME

No Discount For quality; No Discount For Service; No Discount For Credibility!
V Belt-PU Belt-Timing belt