 |
The BELTWORTH can supply many kinds of v-belt, such as wrapped v-belt, wedge wrapped v-belt, Antistatic V-belt, etc. The advantages of the BELTWORTH power transmission belt is Wear resistant cover fabric, low-stretch tension member, specially developed high-grade elastomers, high performance, long service life, uniform belt geometry, high flexibility, suitable for flat belt transmission, maximum economy, temperature resistance from -35˚C to +70˚C, limited oil resistance, antistatic, tolerance stable, matched sets without sorting, recommended for all general-purpose drives with higher horsepower ratings. Conventional V-Belt are measured on the inside length (Example A91 marked sizes on the belt, means that, the length of 91" is inside length, and the outside length is 93")
| Structure: Top layer: The material composed of special rubber that is responsible for reducing the possible effects of impact on the belt. Tensile element (Polyester tensile cords): Constituted of synthetic fiber cords (polyester) that guarantee total power transmission with a very low elongation rate and high resistance to fatigue. Core: A compound prepared to resist the fatigue of compression and to dissipate heat generated by the system; thereby giving the belt a longer life span. Cover fabric (protective surface) | |||
Product characteristics: Wear resistant cover fabric, low-stretch tension member, specially developed high-grade elastomers, high performance, long service life, uniform belt geometry, high flexibility, suitable for flat belt transmission, maximum economy, temperature resistance from -35˚C to +70˚C, limited oil resistance, antistatic, tolerance stable, matched sets without sorting, recommended for all general-purpose drives with higher horsepower ratings. |
| |||
| Application： -- Blending systems | |||
Section | Top width (mm) | Height (mm) | Length Range (Inch) | |
Z | 10 | 6 | 13-196 | |
A | 13 | 8 | 14-236 | |
AB | 15 | 9 | 47-394 | |
B | 17 | 11 | 19-394 | |
BC | 20 | 12.5 | 47-394 | |
C | 22 | 14 | 29-708 | |
CD | 25 | 16 | 47-394 | |
D | 32 | 19 | 118-708 | |
E | 38 | 23 | 177-708 | |
F | 50 | 30 | 15-200 | |
3V(9N) | 9.5 | 8 | 15-200 | |
5V(15N) | 16 | 13 | 44-394 | |
8V(25N) | 25.5 | 23 | 75-600 | |
SPZ | 10 | 8 | 15-200 | |
SPA | 13 | 10 | 23-200 | |
SPB | 17 | 14 | 44-394 | |
SPC | 22 | 18 | 54-492 | |
Mark: |
|
The BELTWORTH can supply many kinds of v-belt, such as wrapped v-belt, wedge wrapped v-belt, Antistatic V-belt, etc. The advantages of the BELTWORTH power transmission belt is Wear resistant cover fabric, low-stretch tension member, specially developed high-grade elastomers, high performance, long service life, uniform belt geometry, high flexibility, suitable for flat belt transmission, maximum economy, temperature resistance from -35˚C to +70˚C, limited oil resistance, antistatic, tolerance stable, matched sets without sorting, recommended for all general-purpose drives with higher horsepower ratings. Conventional V-Belt are measured on the inside length (Example A91 marked sizes on the belt, means that, the length of 91" is inside length, and the outside length is 93")
| Structure: Top layer: The material composed of special rubber that is responsible for reducing the possible effects of impact on the belt. Tensile element (Polyester tensile cords): Constituted of synthetic fiber cords (polyester) that guarantee total power transmission with a very low elongation rate and high resistance to fatigue. Core: A compound prepared to resist the fatigue of compression and to dissipate heat generated by the system; thereby giving the belt a longer life span. Cover fabric (protective surface) | |||
Product characteristics: Wear resistant cover fabric, low-stretch tension member, specially developed high-grade elastomers, high performance, long service life, uniform belt geometry, high flexibility, suitable for flat belt transmission, maximum economy, temperature resistance from -35˚C to +70˚C, limited oil resistance, antistatic, tolerance stable, matched sets without sorting, recommended for all general-purpose drives with higher horsepower ratings. |
| |||
| Application： -- Blending systems | |||
Section | Top width (mm) | Height (mm) | Length Range (Inch) | |
Z | 10 | 6 | 13-196 | |
A | 13 | 8 | 14-236 | |
AB | 15 | 9 | 47-394 | |
B | 17 | 11 | 19-394 | |
BC | 20 | 12.5 | 47-394 | |
C | 22 | 14 | 29-708 | |
CD | 25 | 16 | 47-394 | |
D | 32 | 19 | 118-708 | |
E | 38 | 23 | 177-708 | |
F | 50 | 30 | 15-200 | |
3V(9N) | 9.5 | 8 | 15-200 | |
5V(15N) | 16 | 13 | 44-394 | |
8V(25N) | 25.5 | 23 | 75-600 | |
SPZ | 10 | 8 | 15-200 | |
SPA | 13 | 10 | 23-200 | |
SPB | 17 | 14 | 44-394 | |
SPC | 22 | 18 | 54-492 | |
Mark: |
|
