Open endless Timing Belt Supply
We can deliver open endless timing belt as produced one time, there is black fabric on the surface and the tooth. The max width of belt is 10mm to 120mm for all types. Profiles are 3M,5M,8M,14M, S3M, S5M, S8M, MXL, XL, L, H etc. The length is cut to order, or can be purchased as a full roll. Specialized for applications such as conveying, linear motion, metering, positioning, etc. Normally, our clients need the rubber open endless timing belt as the widths are 10mm, 12mm, 15mm and 25mm, the length is 100 meters per roll.
Benefits:
Trouble free drive solution
Economical-lower cost than chain drives
Smoother and quieter than chain drives
Less maintenance
Increased belt life
High load capacity
High quality materials
Unique fabrication technology
Open Endless HTD Timing Belt (3M,5M,8M,14M,S3M,S5M,S8M)
Measured in Millimeters.
Part numbers go by the belt’s tooth pitch and width (comes in precut sizes)
These belts are open ended and not formed together.
Example: HTD8M10mm-100FT is 100ft long, HTD8M is pitch, 10mm is width.
Open Ended Trapezoidal Tooth Timing Belts( XL, L, H)
Measure in inches
Part numbers go by the belt’s tooth pitch and width ( comes in precut sizes)
These belts are open ended and not formed together.
Example: 075L-100FT is 100ft long, L is pitch(3/8”), 3/4inch(0.75”) width.